Compact Pressure Transmitter
Compact all-welded construction for pressure measurement in space-constrained machinery and hydraulic systems.
- Measurement type
- 表压
- Range
- 0~1 / 1.6 / 2.5 MPa 可选
- Overload
- 200% FS
- ✓ Wet-calibrated before dispatch with a calibration record
- ✓ Standard models ship in 5 working days; customised in as little as 10
- ✓ Full technical support from selection through commissioning
Compact all-welded construction for pressure measurement in space-constrained machinery and hydraulic systems.
Overview
Compact all-welded construction for pressure measurement in space-constrained machinery and hydraulic systems.
Features
- All-welded stainless steel body — no O-ring seals, zero leak path
- Compact footprint suits integration into machinery and hydraulics
- Vibration and shock resistant for mobile equipment
- Reverse-polarity and over-voltage protection
- Optional ratiometric 0.5–4.5 V and 4–20 mA dual output
Typical Applications
- Hydraulic power units and construction machinery
- Injection moulding and die-casting machines
- Air compressors and pneumatic systems
- Machine tools and automated lines
Selection Notes
The above reflects the standard configuration. Final selection depends on media properties, operating temperature and pressure, and environmental conditions. For special requirements, please contact our engineers for tailored advice. Technical parameters are subject to the final supply agreement.
| Measurement type | 表压 |
|---|---|
| Range | 0~1 / 1.6 / 2.5 MPa 可选 |
| Overload | 200% FS |
| Accuracy | ±0.5% FS |
| Long-term stability | ±0.2% FS / 年 |
| Output signal | 4~20mA 两线制 |
| Power supply | 12~36 VDC |
| Process connection | G1/4 外螺纹 |
| Diaphragm material | 316L 不锈钢 |
| Media temperature | -20~85 ℃ |
| Ambient temperature | -30~80 ℃ |
| Ingress protection | IP65 |
| Electrical connection | M20×1.5 电缆入口 / 赫斯曼接头 |
| Load resistance | ≤ (U-12V)/0.02A Ω |
Note: the above reflects the standard configuration. Final selection depends on media and site conditions; parameters are subject to the supply agreement.
Features
- All-welded stainless steel body — no O-ring seals, zero leak path
- Compact footprint suits integration into machinery and hydraulics
- Vibration and shock resistant for mobile equipment
- Reverse-polarity and over-voltage protection
- Optional ratiometric 0.5–4.5 V and 4–20 mA dual output
Typical Applications
- Hydraulic power units and construction machinery
- Injection moulding and die-casting machines
- Air compressors and pneumatic systems
- Machine tools and automated lines
Enquire About This Product
Leave your process conditions and we will respond with selection advice and a quotation within 24 hours.