Submersible Level Transmitter
Directly submerged level measurement for tanks, wells and river-stage monitoring.
- Measurement type
- 表压
- Range
- 0~1 m … 0~200 m H₂O
- Overload
- 200% FS
- ✓ Wet-calibrated before dispatch with a calibration record
- ✓ Standard models ship in 5 working days; customised in as little as 10
- ✓ Full technical support from selection through commissioning
Directly submerged level measurement for tanks, wells and river-stage monitoring.
Overview
Directly submerged level measurement for tanks, wells and river-stage monitoring.
Features
- IP68 fully sealed, suitable for continuous submersion
- Polyurethane armoured vented cable resists tension and condensation
- Built-in barometric compensation removes air-pressure drift
- Optional surge protection for exposed outdoor sites
- Stainless steel weight supplied as standard to resist flow disturbance
Typical Applications
- Municipal water tanks and reservoirs
- Groundwater wells and cisterns
- River and reservoir stage monitoring
- Wastewater treatment and pump-station sumps
Selection Notes
The above reflects the standard configuration. Final selection depends on media properties, operating temperature and pressure, and environmental conditions. For special requirements, please contact our engineers for tailored advice. Technical parameters are subject to the final supply agreement.
| Measurement type | 表压 |
|---|---|
| Range | 0~1 m … 0~200 m H₂O |
| Overload | 200% FS |
| Accuracy | ±0.25% FS |
| Long-term stability | ±0.2% FS / 年 |
| Output signal | 4~20mA / RS485 可选 |
| Power supply | 12~36 VDC |
| Process connection | 投入式（配重块固定） |
| Diaphragm material | 316L 不锈钢 + 聚氨酯电缆 |
| Media temperature | -10~70 ℃ |
| Ambient temperature | -30~80 ℃ |
| Ingress protection | IP68 |
| Electrical connection | M20×1.5 电缆入口 / 赫斯曼接头 |
| Load resistance | ≤ (U-12V)/0.02A Ω |
Note: the above reflects the standard configuration. Final selection depends on media and site conditions; parameters are subject to the supply agreement.
Features
- IP68 fully sealed, suitable for continuous submersion
- Polyurethane armoured vented cable resists tension and condensation
- Built-in barometric compensation removes air-pressure drift
- Optional surge protection for exposed outdoor sites
- Stainless steel weight supplied as standard to resist flow disturbance
Typical Applications
- Municipal water tanks and reservoirs
- Groundwater wells and cisterns
- River and reservoir stage monitoring
- Wastewater treatment and pump-station sumps
Enquire About This Product
Leave your process conditions and we will respond with selection advice and a quotation within 24 hours.