Standard Pressure Transmitter
The workhorse for general industrial pressure measurement: 2-wire 4–20 mA, ±0.2% FS/year long-term stability.
- Measurement type
- 表压
- Range
- 0~10 kPa … 0~60 MPa（多量程可选）
- Overload
- 200% FS
- ✓ Wet-calibrated before dispatch with a calibration record
- ✓ Standard models ship in 5 working days; customised in as little as 10
- ✓ Full technical support from selection through commissioning
The workhorse for general industrial pressure measurement: 2-wire 4–20 mA, ±0.2% FS/year long-term stability.
Overview
The workhorse for general industrial pressure measurement: 2-wire 4–20 mA, ±0.2% FS/year long-term stability.
Features
- Diffused-silicon element with automatic temperature compensation
- Range and zero field-configurable — no factory return needed
- All-welded 316L diaphragm compatible with a wide range of media
- Optional HART for remote configuration and diagnostics
- EMC immunity tested for VFD-heavy environments
Typical Applications
- Petrochemical process pressure monitoring
- Water treatment and distribution networks
- HVAC and building automation
- Metallurgy and heat treatment equipment
Selection Notes
The above reflects the standard configuration. Final selection depends on media properties, operating temperature and pressure, and environmental conditions. For special requirements, please contact our engineers for tailored advice. Technical parameters are subject to the final supply agreement.
| Measurement type | 表压 |
|---|---|
| Range | 0~10 kPa … 0~60 MPa（多量程可选） |
| Overload | 200% FS |
| Accuracy | ±0.25% FS |
| Long-term stability | ±0.2% FS / 年 |
| Output signal | 4~20mA 两线制 + HART（可选） |
| Power supply | 12~36 VDC |
| Process connection | M20×1.5 / G1/2 外螺纹 |
| Diaphragm material | 316L 不锈钢 |
| Media temperature | -40~125 ℃ |
| Ambient temperature | -30~80 ℃ |
| Ingress protection | IP66 |
| Electrical connection | M20×1.5 电缆入口 / 赫斯曼接头 |
| Load resistance | ≤ (U-12V)/0.02A Ω |
Note: the above reflects the standard configuration. Final selection depends on media and site conditions; parameters are subject to the supply agreement.
Features
- Diffused-silicon element with automatic temperature compensation
- Range and zero field-configurable — no factory return needed
- All-welded 316L diaphragm compatible with a wide range of media
- Optional HART for remote configuration and diagnostics
- EMC immunity tested for VFD-heavy environments
Typical Applications
- Petrochemical process pressure monitoring
- Water treatment and distribution networks
- HVAC and building automation
- Metallurgy and heat treatment equipment
Enquire About This Product
Leave your process conditions and we will respond with selection advice and a quotation within 24 hours.