Sheathed RTD Assembly
Sheathed platinum RTD with fast response and vibration resistance for pipe and surface measurement.
- Sensing element
- Pt100 / Pt1000
- Calibration
- Pt100 A级 / B级
- Measuring range
- -200~500 ℃
- ✓ Wet-calibrated before dispatch with a calibration record
- ✓ Standard models ship in 5 working days; customised in as little as 10
- ✓ Full technical support from selection through commissioning
Sheathed platinum RTD with fast response and vibration resistance for pipe and surface measurement.
Overview
Sheathed platinum RTD with fast response and vibration resistance for pipe and surface measurement.
Features
- Down to Φ3 mm for small pipes and tight spaces
- Sheathed construction bends to suit site routing
- Short response time for fast temperature tracking
- Pressure rating up to 6.4 MPa
- Optional duplex elements for redundant measurement
Typical Applications
- Pipe surface and thermowell measurement
- Bearing and motor winding temperature
- Test rigs and constant-temperature baths
- Chemical reactor temperature
Selection Notes
The above reflects the standard configuration. Final selection depends on media properties, operating temperature and pressure, and environmental conditions. For special requirements, please contact our engineers for tailored advice. Technical parameters are subject to the final supply agreement.
| Sensing element | Pt100 / Pt1000 |
|---|---|
| Calibration | Pt100 A级 / B级 |
| Measuring range | -200~500 ℃ |
| Accuracy | ±0.15 ℃ @ 0℃ (A级) |
| Output signal | 4~20mA 两线制 |
| Power supply | 12~36 VDC |
| Sheath material | 316L 不锈钢 |
| Sheath diameter | Φ3 / Φ4 / Φ6 mm |
| Insertion length | 按需定制 |
| Process connection | M20×1.5 活动卡套 / 法兰 |
| Pressure rating | ≤ 6.4 MPa |
| Ingress protection | IP65 |
| Response time | t0.5 ≤ 20 s |
Note: the above reflects the standard configuration. Final selection depends on media and site conditions; parameters are subject to the supply agreement.
Features
- Down to Φ3 mm for small pipes and tight spaces
- Sheathed construction bends to suit site routing
- Short response time for fast temperature tracking
- Pressure rating up to 6.4 MPa
- Optional duplex elements for redundant measurement
Typical Applications
- Pipe surface and thermowell measurement
- Bearing and motor winding temperature
- Test rigs and constant-temperature baths
- Chemical reactor temperature
Related Products
Enquire About This Product
Leave your process conditions and we will respond with selection advice and a quotation within 24 hours.