Bimetallic Thermometer
Purely mechanical indication with no power required — ideal for local on-site reading.
- Sensing element
- 双金属片
- Calibration
- Pt100 (A级)
- Measuring range
- -50~500 ℃
- ✓ Wet-calibrated before dispatch with a calibration record
- ✓ Standard models ship in 5 working days; customised in as little as 10
- ✓ Full technical support from selection through commissioning
Purely mechanical indication with no power required — ideal for local on-site reading.
Overview
Purely mechanical indication with no power required — ideal for local on-site reading.
Features
- No power supply needed — suits unpowered sites
- Simple, reliable and virtually maintenance-free
- Large dial for clear reading at a distance
- Optional every-angle joint for flexible dial orientation
- Optional electrical contacts for limit alarms
Typical Applications
- Local pipe temperature indication
- Tank and reservoir measurement
- Heating stations and heat exchangers
- Field inspection point confirmation
Selection Notes
The above reflects the standard configuration. Final selection depends on media properties, operating temperature and pressure, and environmental conditions. For special requirements, please contact our engineers for tailored advice. Technical parameters are subject to the final supply agreement.
| Sensing element | 双金属片 |
|---|---|
| Calibration | Pt100 (A级) |
| Measuring range | -50~500 ℃ |
| Accuracy | ±1.5% FS |
| Output signal | 4~20mA 两线制 |
| Power supply | 12~36 VDC |
| Sheath material | 304 不锈钢 |
| Sheath diameter | Φ60 / Φ100 / Φ150 mm |
| Insertion length | 100 / 150 / 200 mm 可选 |
| Process connection | M27×2 活动外螺纹 |
| Pressure rating | ≤ 2.5 MPa |
| Ingress protection | IP65 |
| Response time | t0.5 ≤ 20 s |
Note: the above reflects the standard configuration. Final selection depends on media and site conditions; parameters are subject to the supply agreement.
Features
- No power supply needed — suits unpowered sites
- Simple, reliable and virtually maintenance-free
- Large dial for clear reading at a distance
- Optional every-angle joint for flexible dial orientation
- Optional electrical contacts for limit alarms
Typical Applications
- Local pipe temperature indication
- Tank and reservoir measurement
- Heating stations and heat exchangers
- Field inspection point confirmation
Related Products
Enquire About This Product
Leave your process conditions and we will respond with selection advice and a quotation within 24 hours.